TRITEX DESIGN &
DEVELOPMENT LTD

Unit 3, Maizefield, Hinckley Fields Industrial Estate, Hinckley, Leicestershire, LE10 1YF, U.K.
Telephone: +44 (0)1455 613111     Fax: +44 (0)1455 613331     Email: info@tritex.co.uk

Home
Products
Search
Feedback
Site Map
Contact

Circular Rib
Core Knitter
Laboratory Knitting
Meat Netting
Revolving Cambox
Revolving Cylinder
Single Jersey (Min)
Single Jersey (Sm)
Single Jersey (Med)
Technical Textiles

WT100
WT200
WT300
WT500

 

Click to view a larger image

Revolving Cylinder (WT100)

The WT100 is the smallest multi feed rotating cylinder machine in the range. It can carry knitting heads up to 6.5" (165mm) diameter. It is possible to fit knitting heads below 3" (76mm) with multiple feeds, but due to the limitation of rotational speed (maximum of 350rpm) owing to the takedown, it is more cost effective to use one of the TM Wire series of machines for narrow tape production.

 

The wire pay off system can be floor / pallet located bobbins with heavy duty snatch detectors mounted on a stand positioned near the machine, or a similar system for smaller bobbin sizes up to DIN 160 mounted on the top of the machine. This system is best suited for wire sizes above 0.006" (0.15mm) to 0.016" (0.4mm) diameter. It provides the best protection against faults in the knitted mesh caused by the wire snagging, by providing a reserve of wire whilst the machine is halted.

 

Detailed view showing the takedown assembly
and how the knitted mesh is rolled-up.


 

WT100 knitting head with a 'double needle'
cylinder to achieve a wider stitch.


 

 

Home ] Circular Rib ] Core Knitter ] Laboratory Knitting ] Meat Netting ] Revolving Cambox ] Revolving Cylinder ] Single Jersey (Min) ] Single Jersey (Sm) ] Single Jersey (Med) ] Technical Textiles ]

Copyright 2009 Tritex Design & Development Limited
[Copyright Notice] [Privacy Policy] [Disclaimer]