TRITEX DESIGN &
DEVELOPMENT LTD

Unit 3, Maizefield, Hinckley Fields Industrial Estate, Hinckley, Leicestershire, LE10 1YF, U.K.
Telephone: +44 (0)1455 613111     Fax: +44 (0)1455 613331     Email: info@tritex.co.uk

Home
Products
Search
Feedback
Site Map
Contact

Circular Rib
Core Knitter
Laboratory Knitting
Meat Netting
Revolving Cambox
Revolving Cylinder
Single Jersey (Min)
Single Jersey (Sm)
Single Jersey (Med)
Technical Textiles

WT100
WT200
WT300
WT500

 

Revolving Cylinder (WT500)

The WT500 is the largest revolving cylinder machine in the range. Practical knitting head diameters suitable for this model are from 20 (508mm) up to 26 (660mm) incorporating up to 8 feeds with multiple ends and materials per feed. The standard machine has a takedown capable of rolling up 45 (1140mm) wide knitted roll (dependant on knitting head size) and up to a diameter of 24 (610mm).

 

This machine incorporates the use of a gantry to elevate machine operators in a suitable ergonomic position. The gantry easily splits for the removal of the knitted roll from the takedown once complete. The rolls are knitted on a parallel aluminium centre tube for easy removal and replacement thus diminishing downtime. Bobbins can be mounted overhead or on the perimeter of the gantry for easier replenishment, and wire run detection at both ends of each feed.

 

A WT500 knitting head with eight feeds and heavy duty needle detection.

 

WT500 takedown assembly - the knitted mesh is precisely
 wound on to an aluminium centre by twin peripheral rollers,
keeping the mesh perfectly aligned by a system of rack and pinions.


 

 

Home ] Circular Rib ] Core Knitter ] Laboratory Knitting ] Meat Netting ] Revolving Cambox ] Revolving Cylinder ] Single Jersey (Min) ] Single Jersey (Sm) ] Single Jersey (Med) ] Technical Textiles ]

Copyright 2009 Tritex Design & Development Limited
[Copyright Notice] [Privacy Policy] [Disclaimer]